kellyf

After replacement with new Ford engine have code P0016. Scope pattern normal on cam and crank. Check engine light with long crank. Im pretty sure this has been addressed before. Can someone kindly send me in right direction.

2018 f 250 door removal. Now only on power window works and no center stack at all.Both right side doors were removeed. anyone run into this?

I have tried to scan 2 18 model Raptors with The Ids and I get a ton of Communication faults on each one. Does this truck Need FDRS?

Thank you.I was wondering about the ssm, but didn't know if it would apply.

My sister in law has a 2014 f 150 That even with the key off a message appears that states battery saver on. Turn key off or start engine in mesage center. Anybody run into this before?

Yukon, did you ever find one?

They have opportunities in many cities.

Re: https://jobs.ourcareerpages.com/job/266518?source=AsTech&jobFeedCode=AsTech&returnURL=http%3A%2F%2Fwww.astech.com

I'm happy to say I am now working for a company called Astech. We remotely scan modules on wrecked vehicles and give advise and or remotely reprogram modules. They are located all over the country and are the only one in the business of doing so. They are hiring at many locations right now, and it is a great job for senior tech's.

Thanks for the help

Thank you sir. Can you get me the hose number please? Also what kind of labor are we looking at?

the fuel leak appears to be from a a hose on the left back side of the block as viewed with the doghouse off. Is this a return line. I have heard of air intrustion causing no starts.is there a name for the fuel line return kit and if so does it include this line? I have little experience on older 7.3 engines with mechanical injector pumps. Any help apprieciated

Pulled the dog house on this on and line at left treat of engine leaking fuel. I think maybe this is a return line. Seemed a while back We got a set of fuel injector return lines which had a name. Also the flow plug module platic at the bottom is turning in to goo maybe from the fuel. I drove it for what was a trans shift concern, but it starting surging and barely made back to dealer and cut off and now a no start.we maybe have a working ngs. No turn signals ,wipers don't work and and light on with no speedometer. Thinking maybe that's a diff speed sensor. More fun for me!

where is the pdf?

Now it is working

Yes

I put my userid and password in then it sends me to stars and I put my stars is and password in. How Do I get to pts website?

Did anyone ever find the 6.0 cab removal procedure with pictures.I use to have it printed out, but lost it.

I I'm working on an 06 F350 ambulance. I have a short on fuse f 24 which goes to the blower motor resistor and also to the low and high pressure switches on the AC. And the wiring that goes to the low pressure switch there were broken wires which had two barrel-shaped looking black devices I suppose or some kind of resistors. Can someone please tell me what these are and is there any type of wiring diagram of ailable for this type of application

Anyone here ever work on Humvee 6.2 or 6.5 engines?

Nice job!

When doing these courses what is the measure to be taken so when you leave the course what you have done is retained?.Never rememeber having to do anything before?

Thanks for info!

Looks like you can replace parts but pan has to come down. Does it have to come all the way out as parts list no oil pan gasket?

95 f 350/ leaking oil around plastic piece where dipstick goes in pan. Is this part of pan ,or can it be replaced seperatly?