Jump to content

kellyf

Members
  • Posts

    262
  • Joined

  • Last visited

Posts posted by kellyf

  1. I'm happy to say I am now working for a company called Astech. We remotely scan modules on wrecked vehicles and give advise and or remotely reprogram modules. They are located all over the country and are the only one in the business of doing so. They are hiring at many locations right now, and it is a great job for senior tech's.

    • Like 1
  2. the fuel leak appears to be from a a hose on the left back side of the block as viewed with the doghouse off. Is this a return line. I have heard of air intrustion causing no starts.is there a name for the fuel line return kit and if so does it include this line? I have little experience on older 7.3 engines with mechanical injector pumps. Any help apprieciated

  3. Pulled the dog house on this on and line at left treat of engine leaking fuel. I think maybe this is a return line. Seemed a while back We got a set of fuel injector return lines which had a name. Also the flow plug module platic at the bottom is turning in to goo maybe from the fuel. I drove it for what was a trans shift concern, but it starting surging and barely made back to dealer and cut off and now a no start.we maybe have a working ngs. No turn signals ,wipers don't work and and light on with no speedometer. Thinking maybe that's a diff speed sensor. More fun for me!

  4. I I'm working on an 06 F350 ambulance. I have a short on fuse f 24 which goes to the blower motor resistor and also to the low and high pressure switches on the AC. And the wiring that goes to the low pressure switch there were broken wires which had two barrel-shaped looking black devices I suppose or some kind of resistors. Can someone please tell me what these are and is there any type of wiring diagram of ailable for this type of application

×
×
  • Create New...