Bruce Amacker Posted April 18, 2016 Share Posted April 18, 2016 FYI, in case you didn't know it, the FP PID is in absolute. We connected a FP guage on it to verify, and it's accurate if you subtract Baro. Too bad they didn't give us a _A or something to tell us that. The WSM gives a pressure but doesn't spec gauge or absolute and forgets to tell you the Pid is absolute. The 14PSI+ difference is probably enough to screw somebody up. These captures are obviously 64PSI actual on the gauge.......... Quote Link to comment Share on other sites More sharing options...
forddieseldoctor Posted April 19, 2016 Share Posted April 19, 2016 That actually makes sense cause I thought 80 psi seemed a little excessive and I think the one I was playing with started out a 14 psi. Quote Link to comment Share on other sites More sharing options...
Brad Clayton Posted April 19, 2016 Share Posted April 19, 2016 This is a pretty big hurdle my guys have to get over in class......gage vs. absolute. Their eyes light up like kids on Christmas morning, though when they finally get it and use it in real world applications. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.