Wire Loom Installation Tool

[Keith Browning]

I found this on my Facebook feed and thought it was interesting. If you do a lot of harness fabrication or repair it could be a time save not to mention lower frustration levels.

 

https://electropicks.com/products/wire-loom-insertion-tool

 

[8WA Sman]

I picked one of those up from Del City, I'm guessing more than 5 years ago & for some reason I don't ever use it.

[forddieseldoctor]

I saw those on del city too. I was wondering if they worked decent or not. 

[DieselD]

I have tried them and they are ok however I end up just doing it by hand in the end anyway

[Keith Browning]

I hear ya, it's usually not very difficult to insert a bundle of wires into convoluted tubing. A lonnnnng time ago our fleet department had a huge order of NYC police cars to upfit and deliver and the overflow ended up in our shop at the dealership. I was for a couple of weeks fabricating and installing harnesses  for light bars  that began with pulling 10' of 6 wires simultaneously, loosely taping them and installing the convolute and then wrapping with tape. I could have made good use of this tool for that!