2005 Econoline 6.0 elevated idle install

[KHFord]

Hello I am trying to find some instructions on how to install/activate elevated idle control. This is a fire rescue van with a patient compartment on the back, would like to get some increased airflow through the rad/condenser when they are parked/idling on these hot days. Looks like there should be a way to wire  up  a switch to the pto wires but I can not find instructions. Any one able to point me in the right direction?

[forddieseldoctor]

I looked on the Ford BBAS site and it looks like all of the older stuff has been purged from existence. But if the e-series are the same as the f-series you need to find the blunt end wires for the pto and connect the solid orange wire to a 12 volt powered switch. The parking brake will have to be turned on to make it work. 

[KHFord]

Awesome, thank you! I will give it a go when it comes back.

[8WA Sman]

Here ya go

stationary-idle-control.pdf