Steve Mutter Posted July 3, 2014 Share Posted July 3, 2014 Does anyone know the torque of the hpop gear bolt and if it is left hand thread? I am just puting one in and would like to check the toqrue. Quote Link to comment Share on other sites More sharing options...
Keith Browning Posted July 4, 2014 Share Posted July 4, 2014 Those specifications are hard to find but they are listed in the Coffee Table Books under the Special Torque Chart. Could not tell you why this was not included in the WSM - or at least I could not locate it. Although I have had several apart I do not recall whether the bolt is a left or right hand thread and I do not want to guess. This is not something that is normally supposed to be serviceable as the pump is typically serviced with the gear. Anyway, from what I can find, the specs for ALL 6.0L and 4.5L HPOP Drive gears is: 95 lb/ft or 129 Nm Quote Link to comment Share on other sites More sharing options...
Steve Mutter Posted July 4, 2014 Author Share Posted July 4, 2014 I had one a couple of years back that came loose just after I installed a new reman, I just got in the habit of checking the torque befor installing the pump, but forgot the spec. thanks Keith Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.