2006 Posted July 2, 2017 Share Posted July 2, 2017 I know this is a diesel website, but I thought I'd ask. When programming sync, generation 2, I'm having a problem programming, I have to program it twice for it to work. The first part of the programming works well, its the last part where you transfer the usb drive from the car back to the ids. I always get a error code, general failure 4001. I then reprogram it a second time, then it all works. I've configured the browser according to fords gsb instructions, tried different usb drives, different usb cables,even reloaded ids, but get the same issue. Any ideas? Quote Link to comment Share on other sites More sharing options...
forddieseldoctor Posted July 2, 2017 Share Posted July 2, 2017 What are you running for anti-virus? What do you have for a firewall? Quote Link to comment Share on other sites More sharing options...
2006 Posted July 2, 2017 Author Share Posted July 2, 2017 Don't have anti virus and turned the firewall off. This is just a strict IDS laptop, only used in the shop and no other programs installed. Quote Link to comment Share on other sites More sharing options...
forddieseldoctor Posted July 3, 2017 Share Posted July 3, 2017 After you uninstalled ids to reinstall did you happen to run the ids removal tool before you reinstalled the isd software? What version of windows? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.