Keith Browning Posted December 3, 2022 Share Posted December 3, 2022 My faithful companion for the last 25+ years is shot... creeping, leaking and not going all the way up. I have no idea how old it actually is but it's a Weaver in-ground with a sliding front post that had the rear unit replaced 30 years ago with a Rotary. Equipment company tried new seals then it was test twice - the second time each component and the pipes were tested individually. They called it. Supposedly the company is going to install an entirely new lift which is unitized in a casement with a new floor and epoxy paint when it's done. Of course, this is only after the EPA is satisfied with the ground. So, for now, when I need a lift I'm back out in the main shop with the "general population" and a 15,000 LB Rotary above ground lift. I'll update on the progress as things progress. Whenever the hell that is! Quote Link to comment Share on other sites More sharing options...
forddieseldoctor Posted December 4, 2022 Share Posted December 4, 2022 That is one hell of a lift. Has your dealership thought about getting a set of portables? Quote Link to comment Share on other sites More sharing options...
Keith Browning Posted December 4, 2022 Author Share Posted December 4, 2022 Was discussed as was a 4-post. This style lift is the best for us. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.