Jump to content

Chopper

Members
  • Posts

    4
  • Joined

  • Last visited

Reputation

0 Neutral

About Chopper

  • Birthday 07/15/1974

Retained

  • Member Title
    Freshman Member

Profile Information

  • First Name
    aaron
  • Last Name
    behnk
  • Location
    Nebraska
  • Dealership Name
    atchley ford
  1. Sorry, forgot to respond back to this post. Really didnt do much other than change oil to it. Oil was over full and seemed like fuel in it. The truck ran and idled like a champ after that. Was kinda surprized that haddened been done already...haha But anyway it may have a weak pump, but as far as I know it made it all the way to east coast with no troubles.
  2. 2003 F550 6.0 200,000 miles runs rough, loses power and dies hot. Starts right back up but still no power. P2290 low icp when dies. Been in the shop a couple weeks now. Couple other techs been working on it. They have put 3 or 4 injectors in it. Ipr, Icp and pigtail. Swapped Ficms. water pump fan clutch, Fuel filters and new spring in regulator. They also pulled the gearator and there was no scoring. And Im sure a few other things Im forgeting. Guess it had multiple problems. But the concern that it came in for is still there. I got to drive it once so far. It is a turd and seems to run rough/miss all the time. But after about 5 miles it will lose power and not rev up and eventully die. Will start up after afew secs and limp back to shop. Icp would drop to 300ish and back to 1500 and just keep bouncing all over. Ipr would go up. Ficm sycn and voltage is good. Fuel pressure about 60 and oil pressure 20 or so. and neither changes as it starts to lose power and die. Icp V was real erratic. Not really a sawtoothed pattern but more like barbed wire look to it?? I guess I get to work on it tommorrow. Im thinking the HPOP is weak and causing all the concern. It just acts different that most bad pumps Ive seen. Any tips on checking the pump. Tryed to find a screen shot of the ICP V on some good and bad pumps but I cant locate those. Thanks Aaron
  3. I seen on Craigslist a guy around here was paying $2.50 for egr valve cores. Was buying alot of other junk too. But I thought that was funny, and was wondering wtf? until I read this thread.
  4. I also would suspect right up pipe. command on the vgt. should make it more noticable and easier to find/hear leak
×
×
  • Create New...