stevo90

anyone seen or heard of running hydrolic fluid as fuel in any type of deisel like 6.0 or 7.3

dtc where po299 and they said the turbo had just been cleaned at another dealer to put it outside. ford hotline said turbo is stuck due to ebp pressure the pcm is rolling the vgt back to get ebp down

i have a 06 6.0 van with vgt at 15% at idle and will not build boost till about 50 mph map 14 psi at idle maf at 22 g/s at idle ebp 16 with new sensor and connector after 5min of running the ebp goes to 22 psi never gets over 27 psi on cruise can comand vgt to 35% and the truck will build boost i know i am overlooking somthing simple an help the vgt will come off of 15% after about 35 -40-mph and make boost

how do i get it out of this mode