jbarnett31 Posted September 18, 2008 Share Posted September 18, 2008 when i am trying to use nets to program the esn for tsb 08-17-1 i am having a problem getting it to work can someone help me with how to use the nets program it keeps telling me my cable is failing Quote Link to comment Share on other sites More sharing options...
Keith Browning Posted September 18, 2008 Share Posted September 18, 2008 Are you using the IC4 COM cable??? Quote Link to comment Share on other sites More sharing options...
jbarnett31 Posted September 18, 2008 Author Share Posted September 18, 2008 yea and i have checked the tsb for the error code 99 but it is still saying cable failure Quote Link to comment Share on other sites More sharing options...
Alex Bruene Posted September 20, 2008 Share Posted September 20, 2008 Any error usually comes up as a 99. I find that it's normally a password error. Make sure that you've got an up to date NETS password. A quick contact to hotline will verify that. That, and making sure that it is entered into the NETS settings if the software has been recently updated. Quote Link to comment Share on other sites More sharing options...
Keith Browning Posted September 22, 2008 Share Posted September 22, 2008 Alex, I ran into that once and it drove me nust until I fgured it out. Justin, did you correct this yet? You also need to be sure that the proper cable and comm port are selected in the software settings in NETS. Like alex said, many failures fall under the 99 code. Quote Link to comment Share on other sites More sharing options...
jbarnett31 Posted October 10, 2008 Author Share Posted October 10, 2008 i finally got it figured out the md truck at out shop was not at the newest level, i downloaded the update and it seems to have taken the program Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.