Roda Deaco tied into throttle valve harness...

[lmorris]

I have two 2017 F350's, 6.7L trucks with the Roda Deaco shut down systems using the factory throttle plate as the shut down valve. One is in with a check engine light on that points straight to the throttle valve. Both are going back to the installer to verify installation. Anyone else see this?

[Alex Bruene]

I seem to recall talking about using the EGR throttle plate as a positive air shutdown during new model training...  I swear we were told the throttle plate isn't strong enough.

[lmorris]

I seem to recall talking about using the EGR throttle plate as a positive air shutdown during new model training...  I swear we were told the throttle plate isn't strong enough.

I can see that, all the shut down valves have plates twice as think as the factory ones.