STROKERTEC45

Oh sorry, On the meter on dash

Back to fuel economy,I'm in Detroit training center now(Allen Park)for the 6.7L class. The two instructors I know here tell me on a trip to Cincinnati Oh. for a train the trainer class, driving hard while making recordings for the class they averaged 17.8 mpg sounds pretty good.

I KNOW WHAT I WOULD DO IN THAT CASE /forums/images/%%GRAEMLIN_URL%%/2cents.gif /forums/images/%%GRAEMLIN_URL%%/flamethrower.gifTHAT TSB AND CLAIM DIAG. SHEET AND ALL AVAILABLE LABOR OPPS THAT CORRESPOND TO THE WORK AT HAND. AND MAYBE SOME M TIME SO CLOCK THOSE OPPS AND USE THAT PEN /forums/images/%%GRAEMLIN_URL%%/banghead.gif /forums/images/%%GRAEMLIN_URL%%/hammer2.gif GOOD LUCK

I checked Mitchel On Demand Online and came up with same spec as Keith has listed /forums/images/%%GRAEMLIN_URL%%/thumbup.gif for 92 Discard @1.43 inches

This data was taken from a Wagner Lamp Specification Guide Trade No. 194 Design Volts 14.0V Watts 3.78 Amps 0.27A Avg. CP Life 2500 hrs Hope this helps /forums/images/%%GRAEMLIN_URL%%/thumbup.gif /forums/images/%%GRAEMLIN_URL%%/rockon.gif dont forget a small cushion for start up draw on circuit Very good info here for all kind of bulbs for automotive use http://www.sunraylighting.com/pdf/Catalog.pdf

I also remembered seeing a tsb for a/c shaft seals so I went for a search and could only find this tsb 06-4-9. Be carefull I dont think it applys to your year /forums/images/%%GRAEMLIN_URL%%/hammer2.gif /forums/images/%%GRAEMLIN_URL%%/banghead.gif Some 2002-2006 vehicles equipped with an FS-10 A/C compressor may experience a non operational A/C compressor due to a low freon level caused by a leaking shaft seal. ACTION: Replace the A/C compressor shaft seal following the Service Procedure. SERVICE PROCEDURE If the shaft seal on the front of the A/C compressor is leaking, replace the shaft seal (F1VY-19D665-A) and not the compressor assembly. Replacing the shaft seal should correct the leaking condition. When replacing the seal, follow the procedure outlined in Workshop Manual, Section 412-03. PART NUMBER PART NAME F1VY-19D665-A A/C Compressor Seal Kit

/forums/images/%%GRAEMLIN_URL%%/thumbup.gif

The Inductive Heat Strategy is tied to PCM calibration, so when you do one module you will do all three before done /forums/images/%%GRAEMLIN_URL%%/crazy.gif

LOOKS LIKE A HELL OF A WEENIE ROASTER /forums/images/%%GRAEMLIN_URL%%/banghead.gif /forums/images/%%GRAEMLIN_URL%%/crybaby2.gif Not tryimg to steal your fame for the pic Rickster42, Just thought it would be better served here! /forums/images/%%GRAEMLIN_URL%%/thumbup.gif