lmorris Posted March 9, 2011 Share Posted March 9, 2011 Had a set of heads off of a 6L waiting for Dieselcare approval. Normally I would spray the block and cylinders with penetrating fluid to stop any rust build up. In may haste I grabbed a can of Fluid film and started spraying. Oh well, no harm done, so out goes the truck. 2 weeks later I finally get to put the heads back on. As I wiped all the fluid film off the head gasket surface of the block, I found out that the fluid film had dissolved all the crap I would normally have to scrap off. Quote Link to comment Share on other sites More sharing options...
Brad Clayton Posted March 9, 2011 Share Posted March 9, 2011 What is fluid film? Quote Link to comment Share on other sites More sharing options...
lmorris Posted March 10, 2011 Author Share Posted March 10, 2011 What is fluid film? Try this Quote Link to comment Share on other sites More sharing options...
Brad Clayton Posted March 10, 2011 Share Posted March 10, 2011 Ah, I am now educated. Quote Link to comment Share on other sites More sharing options...
Aaron Posted January 12, 2012 Share Posted January 12, 2012 It kinda smells like vomit though. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.