snw blue by you Posted January 9, 2007 Share Posted January 9, 2007 Haven't seen one of these in awhile. Has anyone ever removed one w/o removing the intake much like the late models, is it even possible? Think I would know this, but nooooooooo. Thanks, Stephen. BTW, It's an '04 minus the intake crossover, thats why I'm curious. Quote Link to comment Share on other sites More sharing options...
dieseltech Posted January 9, 2007 Share Posted January 9, 2007 Just finished a early built 04 H/P pump intake manifold needed to be removed. The late build 04's do not require removing the intake. Quote Link to comment Share on other sites More sharing options...
ErickBaker Posted January 10, 2007 Share Posted January 10, 2007 I can't remeber the build dates but I did a 2004 HPOP and did not remove the intake. I used a 8mm swivel ratchet wrench to get the bolts under the right side of the intake. Otherwise it was no problem. Quote Link to comment Share on other sites More sharing options...
Alex Bruene Posted January 10, 2007 Share Posted January 10, 2007 The early builds with the crossover at the rear of the intake require removal of the manifold. Atleast I have yet to find a way to get it out any other way. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.