Jump to content

4-screw FICM vs 7-screw

Rate this topic


Recommended Posts

Yes they will interchange without issue. I have two now I purchased off car-part, and one had a low FICM main power, took it apart and soldered it to use as a tester, and has always worked, one is a 4 and other is a 7, and I dont pay attention to which one I use if I want to swap in a known good FICM.

Link to comment
Share on other sites

Thanks for the replies. I sold a 7 screw one on Ebay for a core and I listed it saying that it would fit all 6.0's and the guy that bought it is raising hell that it's a 7 screw and will only work on early 6.0's. He rebuilds them and sells them on ebay. You might of seen his auctions they have a picture of a woman holding a ficm below her huge breasts, real classy. So now he opened a case against me. I called a junk yard and their books show they all interchange. I just wanted to make sure there wasn't something I didn't know about the early ones that would make not work on the newer ones. Thanks for the help.

Link to comment
Share on other sites

If you look at the aucton number I gave you can see who the buyer is and contact him through ebay. Say hi to him for me.

 

He finally gave up the on the complaint when I refused to give him a partial refund and he couldn't provide proof that they don't all interchange. Of course he said he could win if he tried but he already sold it. The guys a real dick but I'd take his money if he's offering.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...