zog Posted February 5, 2013 Share Posted February 5, 2013 Anyone have any tricks to removing broken glowplug connectors on the drivers side of an e series? Quote Link to comment Share on other sites More sharing options...
Alex Bruene Posted February 5, 2013 Share Posted February 5, 2013 Pop the valve cover, push them out from the inside. Sorry. Quote Link to comment Share on other sites More sharing options...
Keith Browning Posted February 5, 2013 Share Posted February 5, 2013 That is what I resort to when they break up bad enough. You have to pull the oil rail and you can get right under the connector plug and push them out. Quote Link to comment Share on other sites More sharing options...
mchan68 Posted February 6, 2013 Share Posted February 6, 2013 That is what I resort to when they break up bad enough. You have to pull the oil rail and you can get right under the connector plug and push them out.Wow, that sure is a lot of work, just to remove a glow plug harness. Quote Link to comment Share on other sites More sharing options...
Keith Browning Posted February 6, 2013 Share Posted February 6, 2013 Yes it is Mike. Here where in Winter the roads have more salt on them than corn chips do some trucks corrode in odd places. Take an older 6.0L with the original style GP harness. You are not pulling the plastic plugs out of the head easily. Even with the newer one's I have busted them up to the point of putting vice-grip pliers on the wire and wrapping it around them only to break the wire. Pisses me the fuck off to no end when that happens. Fortunately it is not often I deal with that now. The private shops can have them! Quote Link to comment Share on other sites More sharing options...
Matt Saunoras Posted February 6, 2013 Share Posted February 6, 2013 I usually try to get them to rotate in the rocker box first. When they're corroded enough though I just pick them out in pieces. I find pushing the new ones in is usually just as hard as getting the old ones out. Quote Link to comment Share on other sites More sharing options...
Keith Browning Posted February 6, 2013 Share Posted February 6, 2013 I usually try to get them to rotate in the rocker box first. When they're corroded enough though I just pick them out in pieces. I find pushing the new ones in is usually just as hard as getting the old ones out. Use a little Scotch-Brite on the bores to clean them up and then coat 'em with some anti-seize. Quote Link to comment Share on other sites More sharing options...
Aaron Posted February 6, 2013 Share Posted February 6, 2013 Best luck I've had gettin them out is the no mercy method. I always quote replacement if I need to pull them out. I've been grabbing the harness and just yanking like an angry fuckin savage. Only ever had one that didn't come out that way. I know it sounds awful but it seems to work. Lol. Better on an F than an E though. What worked in the past is heating up a self tapping screw and screwing it into the busted piece. Go for a smoke and let it cool, then bump it out with a prybar. Quote Link to comment Share on other sites More sharing options...
zog Posted February 6, 2013 Author Share Posted February 6, 2013 Unfortunetly you need midget hands to get in the glow plug connector area on the e-series. I have removed the valve cover and next the oil rail, which ought to prove to be equally as awesome:) Thanks for the help. Quote Link to comment Share on other sites More sharing options...
Keith Browning Posted February 6, 2013 Share Posted February 6, 2013 I feel your pain brother. I feel your pain. Quote Link to comment Share on other sites More sharing options...
Alex Bruene Posted February 6, 2013 Share Posted February 6, 2013 I have removed the valve cover and next the oil rail, which ought to prove to be equally as awesome:) . Once you've done a few, you'll find they're pretty easy. Quote Link to comment Share on other sites More sharing options...
Brad Clayton Posted February 7, 2013 Share Posted February 7, 2013 Once you've done a few, you'll find they're pretty easy. No thank you. Quote Link to comment Share on other sites More sharing options...
Aaron Posted February 8, 2013 Share Posted February 8, 2013 Once you've done a few, you'll find they're pretty easy. No thank you. I'd rather chuck my wiener through a meat grinder than work on E-Series again. Quote Link to comment Share on other sites More sharing options...
mchan68 Posted February 8, 2013 Share Posted February 8, 2013 I'd rather chuck my wiener through a meat grinder than work on E-Series again.Uummmmm.......don't you think you're exaggerating just a little with that statement? And you already know much I love working on E-Series too. Quote Link to comment Share on other sites More sharing options...
Mbl35 Posted February 8, 2013 Share Posted February 8, 2013 Oh, they're not so bad. Quote Link to comment Share on other sites More sharing options...
Keith Browning Posted February 8, 2013 Share Posted February 8, 2013 I had an unbeleivable run on E-series last year I thought I was gonna go out of my mind. I either got numb to working on them or I convinced myself that they are not so bad. I think having a mental block toward working on them makes it all seem much worse than it is. Quote Link to comment Share on other sites More sharing options...
Alex Bruene Posted February 8, 2013 Share Posted February 8, 2013 I like working on them. Simply because everything pays so well. Around here, there are hundreds of 6.0 E-Series running around, so we've figured out a better way to do just about everything-making them quite profitable. Quote Link to comment Share on other sites More sharing options...
Jeff Clyde Posted February 8, 2013 Share Posted February 8, 2013 I agree with Alex. There is far too many of them on the road in our location. I have seen me go a couple of weeks with nothing but E vans. I personally don't mind them at all; and they pay good too !! Quote Link to comment Share on other sites More sharing options...
Aaron Posted February 8, 2013 Share Posted February 8, 2013 When I worked at Knapp's in Essex, Ontario, for almost two years, I worked on TWO diesel econolines. One was a turbocharger on a cable van, and the other was a set of fuel injectors in a guy's daily delivery work truck. Quote Link to comment Share on other sites More sharing options...
Aaron Posted February 8, 2013 Share Posted February 8, 2013 Sorry, that's two 6.0 ones. I had a regular customer with a 7.3 one, but never touched the motor. Just commercial safeties and fixed stuff as his guys wrecked it. Changed a lot of mirrors on that van. Quote Link to comment Share on other sites More sharing options...
Matt Saunoras Posted February 9, 2013 Share Posted February 9, 2013 If I had to choose between econolines and doing nothing I'd still pick the e-series. Quote Link to comment Share on other sites More sharing options...
joshbuys Posted February 9, 2013 Share Posted February 9, 2013 Econolines aren't bad at all, once you've done a couple (as with anything else) they're 'easy' and you can make PLENTY of time on them since everything pays so well on them. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.