Chase

I do the same. Remove plate, I haven't had any come back on me yet.

That ought to make you more valuable shouldn’t it???

Those barrel shaped things are probably diodes. The box upfitters bring a/c clutch signal from the box to turn on the clutch whether the head unit requests a/c or not. I have seen those diodes go bad before.

Besides the ford pressure tester tool, what does everyone use to check fuel pressure on a 6.0? Changed shops and need to get one. I havent used anything but the Ford tool.

I had one on a 6.0 E van once that was blowed out.

Wow, I'm glad I got out when I did. I just love wasting my time on that prior approval bs.

Is there a way to tell the difference between a 15 and 17 degree pump on the outside other than output line fittings? Got a truck superduty that has an obs engine with AA's in it need to know if I can id the HPOP before I quote a set of AD's for it.

How many miles you got on that unit now? Thinking about trying it in my 4R100, it's got 300,000 mi on it i'm gonna pull it apart come summer anyways.

I would say maybe a chassis cab that doesn't get worked hard enough to get the exhaust hot might do that as well.

I'd like to have one of those, but here you buy your own laptop. So until I win the lottery I'll use this asus.

14psi is not enough oil pressure to keep the VCT system happy. 15 psi is min book spec. Good ones i've seen will have 30 @ hot idle. I call that 5.4 death rattle. It's engine time.

I'll second that, my Excursion has a 58V FICM on it and has the perpetual p0611.

I vote no.

Last 8.8 clutch pack I did was that way. Had carbon fiber clutches also.

Have they kept up with the PH level of the coolant though? How many miles on the unit? Just thinking out loud here.

Whats the entire PN for the kit? Never mind Found it.....

Improperly maintained coolant?

850 foot pounds of torque and a heavy right foot on pavement could cause that.

At what point would it take for management to say WTF? That's bad. I'll be the first to admit i've mis-diagnosed some stuff but some people don't need to be working on diesels.

Just to let everyone know, I had one of these this week that the tsb would not bring the truck out of idle only mode. Talked back and forth with hotline and Ordered a PCM this afternoon. Truck has 275 miles on it. Customer was bringing it home from the upfitter after having a service bed installed. G400 was moved to an incorrect location.

I use 1/8" pipe tap and epoxy them in.

That sounds like a good time!

Same here. Congrats!

What is wrong with original unit? I've had a couple fixed at SIA electronics. http://www.siaelec.com/

Hy-gard is John Deere's trans/hydraulic fluid correct?