Aaron

Vans or Pickups, Mike?

I hope you aren't directing that comment at any Big Angry Hillbillies....

Last three of them I did in vans, Ford called back.

Have fun! Never done an ambulance, done lots of E-vans and F-trucks though. If it's warranty, keep your punch times for your MT punch.

Heh...yep. And it's still in use

2 things I got from the Ford stuff. 1. They have to prove, beyond a shadow of a doubt that the aftermarket component caused the failure. if there's any window of doubt that can be cast on the failure - I don't think ford wants to deny it and risk the customer taking them to court, which brings me to... 2. I was told by several different people that when faced with the possibility of legal action, when it comes to a warranty repair - Ford will just lay down and take it because the cost of the repair will likely be less than the cost of court, lawyers, etc.

Re: That video - is there any doubt in your mind why they call it dope...that guy done smoked himself retarded.

Hey Jim! How was your trip?

Almost worth a try - however, Front Crank seal cannot be claimed anymore with the bedplate reseal, I just did one last week and noticed this.

Pretty close, apparently! Map from the Marina to my house. (no more edits.)

Dude, i LIVE in Colchester, ya PUTZ! Westchester Beach, off CR 50. Look for the big red machine in the driveway with the WAYYYY outta province plates on it.

I've only ever done ONE set of heads with the cab on, and it was quite some time ago.

Just undo the bolts off the exhaust manifold, and then remove the head. Should be able to get it out fairly easy once you have the heads off. Just put it back in before you put the head on, set it on the tin shield bolted to the HPOP cover.

Aaron Robertson 206 Chester Road, RR#3 Harrow, Ontario N0R 1G0 CANADA I had a buddy mail me an Illinois plate, and it came across the border OK. Should it be cheaper/easier, you can send 'em to Larry, or if you're on the Department of Homeland Security's watch list or something...maybe metallic out of country mail would be a bad idea. LOL. You got over to Windsor yet, Larry? I'm really in the need for an old school blue backgrounded MI plate, I think I have a later model one in my toolbox at work.

I'm collecting up some license plates for my garage wall. Anyone wanna chip in and help? Thanks fellows in advance for all your help! I wanna get all the states and territories and provinces for the wall.

How many 6.0 head bolts do you want? I have new and used in stock.

Guy across from me is doing a LOF on a 7.3 Super Duty. I happen to wander by, and this is the plate. So I laugh a little. It's about break time, so I grab a coffee and wander outside, to see the back of the truck, and there's this: I laughed. A lot.

Pfft. That's NOTHING. I did a transmission pan gasket on a 2004 F-150 last week. That's right. I said it. What kind of fixture do you mount that thing in? Or the big concrete slab known as the floor?

+1 This is gonna direct the HCU to modulate pressure to the wrong wheels in a skid/slip situation, methinks.

I laughed

I thought we've covered this before, but I can't find it. Got an 02 350, intermittent dead pedal and customer says the check engine light, wait to start light, and "some other light" comes on when this happens. I am unable to duplicate this concern. Customer says when it happens, he shuts it off, and restarts it and it goes away. I've got this thing coming back this week for some continued diag so any help would be appreciated. There are no codes. Customer states that this started happening after the IDM was replaced, or that the IDM was replaced for the same concern awhile ago, I'm not 100% sure which now - he was somewhat hard to understand, and I gave my liver quite a punishment yesterday so things are still a little fuzzy.

^^^^^^^^ What kind of noise did that make? Did you get any pictures?

'Cause the DPF delete tuner will turn the MIL off that's caused by the aftermarket exhaust

VD test?

Yes, How can I get them to you?